Designing the FlexPod Solution 500-173 FPDESIGN tests a candidate's knowledge of tools and standards for assessing computing solution performance characteristics and requirements. Passcert provides the latest Designing the FlexPod Solution 500-173 FPDESIGN Dumps that will help you prepare for the Designing the FlexPod Solution exam. It will help you assess your preparation level and you will be able to make things easier and better for yourself. If you are going through all of our Designing the FlexPod Solution 500-173 FPDESIGN Dumps, then it will become a lot easier for you to clear the Cisco 500-173 exam on your first attempt.

The FlexPod Design (FPDESGN) (500-173) exam is a 90-minute, 55-65 question exam that will test System Engineers on their knowledge of FlexPod solution.  This exam tests a candidate's knowledge of tools and standards for assessing computing solution performance characteristics and requirements. In addition this exam will test a candidate's knowledge of hardware components associated with the FlexPod Solution and the process for selecting proper hardware for a given set of requirements.

Exam Code: 500-173 FPDESIGN

Exam Name: Designing the FlexPod Solution

Duration: 90 minutes

Languages: English

Price: $300 USD

Associated certification: Cisco and NetApp FlexPod Design Specialist

1.1 Describe FlexPod components based upon customer workloads

1.2 Describe how to size a solution based on customer requirements in accordance with FlexPod best practices

1.3 Describe the support options for FlexPod

       

2.1 Describe the Cisco UCS components used within FlexPod designs

2.2 Demonstrate knowledge of how to configure the logical components used in a UCS server

3.1 Describe NetApp storage components used within FlexPod designs

3.2 Describe storage protocol considerations in FlexPod designs

3.3 Demonstrate knowledge of the features required for data protection or backup for FlexPod design

4.1 Describe Cisco networking components used within FlexPod designs

4.2 Demonstrate knowledge of FlexPod networking configurations

5.1 Describe access control methods for FlexPod solutions

5.2 Describe the considerations in building a secure multitenancy design

6.1 Describe resources for determining supported FlexPod components

6.2 Demonstrate knowledge of using tools for managing FlexPod

6.3 Demonstrate knowledge of troubleshooting methodologies for FlexPod solutions

1. Which sends support summary information to NetApp through HTTPS?

A. AutoSupport

B. FlexSupport

C. SnapSupport

D. TechSupport

Answer: A

 

2. Before being added to an interface group, interfaces must be in what state?

A. Active

B. Down

C. Maintenance

D. Up

Answer: B

 

3. Which is true about UCS High Availability?

A. Support for 3 Fabric Interconnects

B. Dual homing IOM to Fabric Interconnects

C. Port Channeling within UCS system requires Fabric Interconnects and IOMs to be at least second generation.

D. UCSM supports vPC configuration

Answer: C

 

4. What are the two expected outputs of network interface show? (Choose two.)

A. IP addresses of NAS and iSCSI logical interfaces

B. iSCSI IQNs

C. Namespace of SAN logical interfaces

D. System WW node name

E. WW port names of Fibre Channel and FCoE logical interfaces

Answer: A, E

 

5. Which of the following is an example of a Cisco UCS high availability component?

A. Clustered fabric interconnects

B. vMotion

C. Live migration

D. Cluster shared volumes

Answer: A

 

6. Which Cisco Nexus switch is designed for low latency L2/L3 IP only networks?

A. Nexus 5548

B. Nexus 7000

C. Nexus 3048

D. Nexus 5596

Answer: C

 

7. What is the NetApp recommended bit length that the SSL key should be?

A. 512

B. 768

C. 1024

D. 9216

Answer: C

 

8. How many cluster interconnect switch(es) are required for a 4-node NetApp cluster?

A. 1

B. 2

C. 4

D. 6

Answer: B

 

9. With Data ONTAP 8.2 or later, a two-node cluster has which two connections? (Choose two.)

A. 2x connections for HA Pair storage failover

B. 4x connections for HA Pair storage failover

C. 2x Infiniband connections cross connected on each node for the Cluster interconnect

D. 2x 10GbE Ethernet connections cross connected on each node for the Cluster interconnect

E. 4x 10GbE Ethernet connections cross connected on each node for the Cluster interconnect

Answer: A, D

 

10. When configuring a volume to contain a LUN, which administrative tool automatically applies NetApp recommendations?

A. Data ONTAP command-line interface

B. Microsoft SystemCenter

C. OnCommand System Manager

D. VMware vSphere

Answer: C